WIP Processor Wiki

WIP Servers

For each server defined in WIP, we need to create the processor on the machine where WIP is installed. This is done automatically but when we installed WIP on another server, the old configurations are still there and so we need to create a new processor for each servers on the new machine.

Processor can be defined for the following type of WIP servers.

• SAP (bo)

• QlikView (qv)

• QlikSense (qs)

For simplicity, we shall show an example of how to define a processor for the QlikView Server (qv) server. We shall define a processor for PROD QlikView Server. (If you have other servers like DEV,UAT, you need to define one for each. The same logic is applied for the other type of server like SAP and QlikSense).

Server defined in the WIP Repositories

Open

We shall down define a processor for the EBIWIN2016-QV-PRD. Normally this is done automatically once the server is created. But if we want to create it on another machine, please follow the following steps:-

• Go to Configuration → Processor as shown in the image below:-

Open

• Click on the Processor and the following screen will be shown:-

Click on the “Create” button

• Input the required information and click on the “Save” button

• The new processor will be created on the machine where WIP is installed

• Please note that we define the processor on the machine where WIP is installed.

• Go to the Option Tab

For Qlikview, the following file can be processed by the processor:-

1. QVW

For SAP, the following can be processed by processor:-

1. RPT

2. UNV

3. UNX

4. WID

For Qliksense, the following can be processed by the processor

1. QVF

For the file that is needed to be processed by the processor, put “Use Processor” to YES and then click on the button “Save”

Once done, go to “WIP Setup” or to services.msc to restart the processor service as shown below:-

Alternatively, you can restart it from “Services.msc”

Once the service is restarted, processor is now ready to be used.